Equipped light carrier for 1:87 truck / rear for truck, vertical and horizontal mounting possible!

On these light carriers (set of 2) are already soldered all the resistors and diodes needed for the rear lighting of a 1:87 truck's. On each board there is a white LED for the reversing light, a yellow one for the turn signal, a red LED for the rear light and another red LED for the brake light (slightly brighter than the tail light). Depending on the type of vehicle, the light carriers can be mounted horizontally (for example) semi-trailers or vertically (eg fire brigade).

To enable a comfortable soldering of the required cables, we have integrated larger solder pads on the board. This also allows beginners and self-doers the installation and wiring of lighting on the vehicle. Your own vehicle lighting is now nothing in the way! The boards have a size of 3 x 11.8 mm each. White LED, yellow LED, red LED brake light, red LED tail light.
For wiring, we recommend our copper enamel wire set or our thin strands.

 [ DATA SHEET - 336 Ko ]