Micro motor, diameter 4 mm

TECHNICAL DATA:

• Rated voltage (V): 1,3 
• Idling speed (rpm): 25000
• Start-up torque (µNm): 24
• Average idling current (mA): 43
• Weight (g): 0,47 
• Diameter / length measurements (mm): 4 x 12
• Shaft diameter (mm): 0,7

 [ DATA SHEET - 141 Ko ]  

Micro motor, diameter 6 mm, length without axle 10 mm, axle length 4 mm, diameter 0.8 mm, 1,15 grams

 [ DATA SHEET - 482 Ko ]  

Micro motor M660

TECHNICAL DATA:

• Rated voltage (V): 3 V
• Weight (g): 1.68
• Dimensions diameter / length (mm): 6 x 15
• Shaft diameter (mm): 0.8

This micromotor with a diameter of 6 mm and a length of 15 mm was manufactured as a 5-pole version. This reduces the speed, but at the same time the torque is increased and the motor gains significantly in power. This small micromotor is therefore particularly suitable for self-build gearboxes, e.g. for the Car-System or for radio-controlled 1:87 models. Due to its very small dimensions, the micromotor also fits into tiny models.
The output shaft has a diameter of 0.8 mm and a length of approx. 4 mm and is therefore suitable for matching gears and worms.

TECHNICAL DATA:

• Shaft diameter: 0.8 mm
• Axle length: 4 mm
• Length o. axle: 15 mm
• Cable length: 20 mm
• Voltage: 0,1 - 5,0 V
• U/m: 40000@3V +-15%
• Weight: 1,66 gram

[ Dimensions - 1,5 Mo ]  

This micromotor with a diameter of 6 mm and a length of 10 mm was manufactured as a 5-pole version. This reduces the speed, but at the same time the torque is increased and the motor gains significantly in power. This small micromotor is therefore particularly suitable for self-build gearboxes, e.g. for the Car-System or for radio-controlled 1:87 models. Due to its very small dimensions, the micromotor also fits into tiny models.
The output shaft has a diameter of 0.8 mm and a length of approx. 3 mm and is therefore suitable for matching gears and worms.

 TECHNICAL DATA:

• Rated voltage (V) : 3
• Voltage range (V) : 0.1 - 5.0 V
• No-load speed (rpm) : 25000
• Dimensions diameter / length (mm) : 6 x 10
• Weight (g) : 1,66
• Axle diameter (mm) : 0,8
• Axle length (mm) : 3
• Cable length (mm) : 150

A real all-rounder at a low price. Due to the 7 mm diameter, this motor has a considerable torque and makes it ideal for your own transmission projects. The 1 mm long shaft allows the direct connection of gears and couplings. Nevertheless, the long-lasting engine also fits into smaller models. It is also ideal in the ship model, e.g. Remote control plastic models or set dinghies in motion.

TECHNICAL SPECIFICATIONS:

• Rated voltage: 3.7 volts
• Starting current max.: 120 mA
• Operating voltage: 0.5 - 4 volts
• No load speed: 40000 ± 3000
• Internal resistance: 2.4 ohms ± 20%
• Direction of rotation: clockwise
• Working temperature: (-20 ° C) to (+ 60 ° C)
• Axial end play: 0.05 - 0.3 mm
• Weight: 2.6 grams ± 10%
• Cable length: 250 mm
• Cable colors: red = plus, black = minus

 [ DATA SHEET - 1,49 Mo ]  

This engine is characterized by best start-up characteristics. Already at just over 0.1 V, the engine starts powerfully. The 5-pole version reduces the maximum speed and increases the torque. The engine thus generates power at low speeds and is therefore ideally suited for micro-gearbox construction and all about movement in 1:87 model making.

TECHNICAL SPECIFICATIONS:

• Axle diameter: 1 mm
• Axle length: 5 mm
• Length o. Axis: 16.6 mm
• Cable length: 20 cm
• Voltage: 0.1 - 5.0V
• U / m: 14500 @ 5V

 [ DATA SHEET - 1,46 Mo ]  

This engine is characterized by best start-up characteristics. Already at just over 0.1 V, the engine starts powerfully. The 5-pole version reduces the maximum speed and increases the torque. The engine thus generates power at low speeds and is therefore ideally suited for micro-gearbox construction and all about movement in 1:87 model making.

TECHNICAL SPECIFICATIONS:

• Axle diameter: 0.8 mm
• Axle length: 5 mm
• Length o. Axis: 16.6 mm
• Cable length: 20 cm
• Voltage: 0.1 - 5.0V
• U / m: 14500 @ 5V

 [ DATA SHEET - 1,46 Mo ]  

This small motor is perfect for small models with 3.7V power supply. Be it as a marine propulsion or as a prime mover for larger micromodels, e.g. in 1:43 scale. Due to the 1 mm shaft, it fits our gear wheel assortment so that any gear ratios can be designed here. This also makes it the perfect choice for special features of larger models.

TECHNICAL SPECIFICATIONS:

• Rated voltage: 3V
• Voltage: 1-4.5V
• Idling speed: 19120 rpm
• No-load current consumption: <76 mA
• Current consumption (load): 220 mA
• Torque: 2.1 g / cm
• maximum power consumption: 630 mAh
• maximum torque: 8 g / cm
• Efficiency: 45.7%

DIMENSION:

• Width: 10 mm
• Height: 8 mm
• Length: 15 mm

 [ DATA SHEET - 161 Ko ]  

TECHNICAL DATA:

• Rated voltage (V): 4.8
• Voltage range (V): 0.3 - 4.8
• Speed at rated voltage (rpm): 13500
• Weight (g): 8.1
• Dimensions diameter / length (mm): 12 x 19
• Axle diameter (mm): 1