Brass gear 1:90 with brass gears, dimensions 15 x 6 x 6 mm (without motor), mounted, with motor M705.

With the G90M we have a robust all-rounder when it comes to vehicle drive. Smooth running and pulling power combined in a brass housing. With the powerful 7mm motor and a reduction ratio of 1:90, the drive is ideal for wire-guided models at 2.4 V or also RC trucks at 3.7 V. In addition, the brass housing provides the necessary grip to bring power to the road even in heavy-duty tractors. In the flat version, it also fits ideally in semitrailer tractors and trucks without a flatbed.

TECHNICAL DATA:

• Rated voltage (V) : 3.7
• Voltage range (V) : 0.5 - 4
• Gear ratio : 1:90
• Dimensions (mm) : 15 x 6 x 6 (without motor)
• Axle diameter (mm) : 1

For smaller vehicles, even our G90 drives are sometimes too large. Therefore we have expanded our product range with the G5. It runs with an operating voltage of 3 V and is thus optimally suited for our speed regulator and even the Faller Car System. 
Thanks to its width of only 6 mm, it usually fits easily between the longitudinal supports of the vehicle frame. This universal drive is then completed with a screw / gear wheel combination. As a result, you can create a fast sprinter or a slow-travelling Unimog.

 [ Fiche technique - 705 Ko ]

G700 planetary gear for radar drives, cable winches, etc.

• Voltage range: 0.15 - 5 V
• Speed: 4 - 40 rpm
• Diameter: 6 mm
• Length: 3 cm
• Axle diameter: 1.5 mm
  ;

Our G700 is best suited for windmills, radar drives, cable winches or even crawler vehicles. Like the G5, it also has a 1.5 mm plastic shaft. With 3 V and a reduction of 1:699 it is incredibly powerful for its size. In stationary use it can be combined with our PWM in order to finely regulate the speed. In the process, a very consistently running, slow drive is available in the smallest of spaces!

[ Dimensions - 312 Ko ]

Motor with metal gear unit, for the most extreme forces;

• reduction 1:150, 
• rpm: 10 - 150,
• Weight: 8 grams,
• Voltage Range: 0.3 - 6V
• Dimensions 25 x 12 x 10 mm

 [ DATA SHEET - 650 Ko ]​

For smaller vehicles, even our G90 drives are sometimes too large. Therefore we have expanded our product range with the G5. It runs with an operating voltage of 3 V and is thus optimally suited for our speed regulator and even the Faller Car System.

Thanks to its width of only 6 mm, it usually fits easily between the longitudinal supports of the vehicle frame. This universal drive is then completed with a screw / gear wheel combination. As a result, you can create a fast sprinter or a slow-travelling Unimog.

 [ Fiche technique - 705 Ko ]

Originally developed as a motor for 1:87 lorries, this small gear unit is also excellently suited for light motors on larger vehicles. It can even 
be used to implement winches and special functions. 
The G95 is an enclosed gear assembly set with a gear reduction of 1:95. Ideal for street and off-road lorries. 
The gear assembly set is screwed together, so it can always be disassembled and is service-friendly. The G95 further has M1 mounting holes and can therefore be screwed to the vehicle frame. Because of its compact size the G95 can be built into the vehicle frame to even build tractor units.

Mechanical data:

• Length: 20 mm
• Width (axle beam): 12 mm
• Width (between frame sides): 8.5 mm
• Height: 9 mm
• Height (axis to bottom edge): 4 mm
• Weight: 4.5 g
• Translation: 1:95

Electrical data:
Voltage: up to 3.7 volts

 [ DATA SHEET - 119 Ko ]

For smaller vehicles, even our G90 drives are sometimes too large. Therefore we have expanded our product range with the G5. It runs with an operating voltage of 3 V and is thus optimally suited for our speed regulator and even the Faller Car System. 
Thanks to its width of only 6 mm, it usually fits easily between the longitudinal supports of the vehicle frame. This universal drive is then completed with a screw / gear wheel combination. As a result, you can create a fast sprinter or a slow-travelling Unimog.

 [ Fiche technique - 705 Ko ]

For smaller vehicles, even our G90 drives are sometimes too large. Therefore we have expanded our product range with the G5. It runs with an operating voltage of 3 V and is thus optimally suited for our speed regulator and even the Faller Car System. 
Thanks to its width of only 6 mm, it usually fits easily between the longitudinal supports of the vehicle frame. This universal drive is then completed with a screw / gear wheel combination. As a result, you can create a fast sprinter or a slow-travelling Unimog.

 [ Fiche technique - 705 Ko ]

G136-6 planetary gear for radar drives, cable winches, etc.

• Voltage range: 0.15 - 5 V
• Speed: 10 - 200 rpm
• Diameter: 6 mm
• Length: 3 cm
• Axle diameter: 1.5 mm

Our G136-6 is best suited for windmills, radar drives, cable winches or even crawler vehicles. Like the G5, it also has a 1.5 mm plastic shaft. With 3 V and a reduction of 1:136 it is incredibly powerful for its size. In stationary use it can be combined with our PWM in order to finely regulate the speed. In the process, a very consistently running, slow drive is available in the smallest of spaces!

 [ Fiche technique - 308 Ko ]

G136 planetary gear for radar drives, cable winches, etc.

• Voltage range: 0.15 - 5 V
• Speed: 10 - 200 rpm
• Diameter: 6 mm
• Length: 3 cm
• Axle diameter: 1.5 mm

Our G136 is best suited for windmills, radar drives, cable winches or even crawler vehicles. Like the G5, it also has a 1.5 mm plastic shaft. With 3 V and a reduction of 1:136 it is incredibly powerful for its size. In stationary use it can be combined with our PWM in order to finely regulate the speed. In the process, a very consistently running, slow drive is available in the smallest of spaces!

 [ Fiche technique - 308 Ko ]