This replacement soldering tip for our popular soldering station ZN-99 is pen-shaped and has a width of 0.5 mm. It is particularly suitable for highly intricate SMD soldering operations.

For positioning SMD parts or intricate installations in micro models. A high quality pair of tweezers prevent any mistakes in the workshop. With this 11.5 cm long, curved model, you can pay attention to the job at hand and the finish enables safer operation.

Mason jar solar lamp, the popular kit for all who want to learn to solder.  
The “mason jar solar lamp” soldering kit is perfect for learning about the fundamentals of soldering a circuit board. The extra large solder pads make the first soldering attempts significantly easier. With detailed instructions, different components such as resistors, LEDs, switches etc. are soldered step by step to the circuit board. The result of fully assembling the circuit board and installing it in a mason jar is a cool, fully functioning solar lamp.  You’ll continue to have fun with the soldering kit, even after you have assembled all the parts. 

Who is the assembly kit suitable for?
For students and trainees, and above all, anywhere soldering courses are being carried out e.g the mason jar solar lamp assembly kit is an excellent choice for schools and workshops. As well as this, the mason jar assembly kit can be used at summer camps, in apprentice workshops and for other soldering activities. 

Features of the mason jar lamp: 
The energy from the sun is captured and stored in batteries, thanks to the solar panel. As soon as it gets dark and as long as the battery has been able to store energy over the course of the day, the 3 LEDs should be able to illuminate automatically. The mason jar light can be changed from summer mode to winter mode, to ensure the longest possible service life. In summer, the lamp functions for at least 5 hours at a time.

Extras required for installation:
-    Mason jar or similar with a lid diameter of 85mm
-    Hot glue gun
-    5mm metal drill
-    Hand counterbore
-    Soldering iron
-    Solder

Contents:Soldering kit without mason jar.

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

BE CAREFUL! Not suitable for children under 3 years, choking hazard due to small parts that could be swallowed. 10 years and up.

This soldering kit contains all parts necessary to make a fully functional active speaker for mobile phones and MP3 players, with a stylish wooden case. Soldering and glueing are the most important aspects of the task. And thanks to the wonderful step-by-step instructutions, this project will also be a success. The reward: take away a wonderful sound (battery operated). Open your music app, connect the speaker, turn it on, and you are off! The battery is included in delivery.

The soldering kit is intended as a simple introduction to the basics of soldering.It is ideal for guided soldering courses in school and workshops. The active speakers can further be used in holiday programmes, school camps and other events related to soldering.

You will need:
- Soldering iron
- solder
- tweezers
- small screwdriver
- side cutters
- small phillips srewdriver
- hammer

Contents: Soldering kit, with all components

Age recommendation: from 10 years, always under the supervision of a supervising person.

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

If the kit is completely soldered, it can be used as a torch. By using an extra switch, the Morse code can be reproduced with the flashlight. From 10 years on.

We recommend:
Supervision of the construction and the soldering process by an adult person!

What is still needed:
Soldering irons, Soldering tin, Sidestream, Tweezers

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

The kit USB fan from SOL-EXPERT can be operated on any power bank. This makes the USB fan kit a mobile fan that creates a refreshing wind wherever you need it. Whether bathing, at leisure or in the office, the USB fan always provides cooling.
The construction time of the USB fan is about 30 - 40 minutes. The following work is required: mounting, gluing and soldering.

Contents: wood parts kit, glue, motor, screws, propeller, USB cable, glue, switch

What else is needed: soldering iron and solder, power bank or USB output such as power supply, computer, etc.

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

In the soldering kit Christmas tree genuine Flacker LEDs are used. The kit can be set to permanent or flashing operations. A great electronics kit for the decoration area and all who want to learn the soldering. The enclosed plywood front can be decorated for Christmas and then mounted. Dimensions: 100 x 70 mm. The power supply of the electronic kit "Christmas tree" is made by a power bank or directly to a USB output.

What else is needed:
Soldering iron, solder, side cutter, tweezers, power bank or USB output

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

The soldering kit "flashing heart", with flickering candle LEDs, is ideal for soldering experience when soldering on a board to collect. For this purpose, over 30 components are soldered step by step according to a detailed manual on the board. Once the kit has been set up, the heart can be operated in continuous or flashing mode.

The enclosed plywood front can be decorated as desired and mounted on request. Dimensions: 70 x 70 mm, over 30 components.The power supply of the electronics kit "flashing heart" is provided by a power bank or directly at a USB output.

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

This soldering kit should provide a simple introduction to the basic knowledge of soldering. It is very well suited for guided soldering classes in schools and workshops. In addition, Willi the Ghost can be used in holiday programs, in country school homes and other events around the topic of soldering. 

Dimensions: 105 x 82 x 28 mm (H x W x D).

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

This soldering kit contains all the parts needed to build a solar-powered night light. For this purpose, the components supplied are simply soldered together with a little solder. The circuit is already built and ready for use.

The function of the circuit:
During the day, the energy generated by the solar cell is stored in the battery and supplies a warm white LED with approx. 25 mA, which switches on automatically in the evening at dusk. Depending on the charge level of the battery, the LED lights up all night. If the rechargeable battery is largely discharged, the LED is switched off, which prevents a deep discharge of the rechargeable battery and thus significantly extends the life cycle of the rechargeable battery.

Application:
Solar garden light, solar house number light, solar night light, lighting for birdhouses and decorative objects and much more around the house and garden.

Scope of delivery:
Warm LED, rechargeable battery, battery holder, coil, solar cell, charging electronics QX5252, instructions.

[ INSTRUCTIES - 117 Ko ]