With this soldering kit you can build a great electronic cube. Thanks to the detailed colour instructions and the included bending aid for resistors and diodes, the "electronic cube" soldering kit is ideal for beginners, beginners and advanced students.
A standard 9 V battery (not included) serves as the power supply. When the start button is pressed, the soldered IC generates a random number between 1 and 6 and outputs this value on the 7 large red 5 mm LEDs. The "electronic dice" thus replaces conventional dice, is modern and does not fall off the table when playing. Especially wild or older dice players appreciate this.
Size: 40 x 60 mm

Difficulty level: easy / medium
Construction time (depending on experience): 45 - 60 minutes
Age recommendation: from 10 years (only under adult supervision!)

 [ MANUAL - 1,20 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

With this soldering kit, you can make important decisions easy in the future, because from now on, this often difficult task will be taken over by the electronic decision aid. A random generator lights up either the red LED for "NO" or the green LED for "YES" after pressing a button and a short voltage phase. The decision is made, phew, that was really easy! This makes the decision-making aid ideal for all long-sufferers, doubters and anyone who wants to make things easy for themselves.

Thanks to the detailed colour instructions and the included bending aid for resistors and diodes, the soldering kit "electronic decision aid" is ideal for beginners, beginners and advanced solderers.
A standard 9 V battery (not included) serves as the power supply.

• Size: 55 x 30 mm
• Difficulty level: easy/medium
• Assembly time (depending on experience): 35 - 45 minutes
• Age recommendation: from 10 years (only under adult supervision)

  [ MANUAL - 1,28 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

With this soldering kit, a great game of skill can be built. Two eyelets of different sizes have to be guided along the wire so that it is not touched by an eyelet at any time. If the wire is touched, the buzzer sounds and the red LED signals: unfortunately lost, you wobbly hand smiley. Press the button to reset the circuit, the green LED lights up again, the buzzer goes silent and off you go again. Two different eyelet diameters allow for 2 differently difficult levels. A standard 9 V battery (not included) serves as power supply.

Thanks to the detailed colour instructions, the "Hot Wire" soldering kit is suitable for tinkerers, small and large electrical engineers, gamers, soldering beginners, pupils and anyone who enjoys soldering. The well thought-out construction concept of this soldering kit enables even soldering beginners to take their first steps into the exciting world of electronics and soldering.

• Size of the board: approx. 40 x 80 mm
• Operating voltage: 9V (9V block)
• Current consumption: approx. 50 mA
• Difficulty level: easy / medium
• Construction time: 45 - 60 minutes
• Age recommendation: from 10 years (under adult supervision!)

  [ MANUAL - 1,38 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

This soldering kit can be used to train dexterity: Skilfully guide the brass wire through the centre of the eyelets without it touching two eyelets at the same time. If this happens, the red LED lights up and you have to start again. 3 different sized eyelets require increasing skill and concentration.

• Size of the board: approx. 85 x 60 mm
• Operating voltage: 9V (9V block)
• Power consumption: approx. 50 mA
• Difficulty level: easy / medium
• Construction time: 45 - 60 minutes
• Age recommendation: from 10 years (under adult supervision!)

What else is needed for assembly:
Soldering iron, solder, tweezers, side cutters

  [ MANUAL - 1,75 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

This soldering kit can be used to train dexterity: Drive the brass wire along the plotted course. The brass wire must touch the conductor track at all times. If the contact is interrupted, the buzzer buzzes loudly and you have to start all over again.

• Size of the circuit board: approx. 150 x 75 mm
• Operating voltage: 9V (9V block)
• Current consumption: approx. 50 mA
• Difficulty level: Easy / Medium
• Assembly time: 45 - 60 minutes
• Age recommendation: from 10 years (under adult supervision!)

What else is needed for assembly:
Soldering iron, solder, tweezers, side cutters, heat gun

  [ MANUAL - 1,20 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

The "VARIOSAND" circuit board kit is ideal for soldering beginners, all budding electronics engineers, hobby technicians and anyone who enjoys working with a soldering iron or a soldering station. More than 60 components are soldered onto the "VARIOSAND" board, including an already programmed microprocessor. Once the board is completely assembled, a great programmable hourglass is created.

The special thing about it is that a different time ("amount of sand" available for 1 - 109 minutes) can be selected each time. For example, VARIOSAND can be set to 5 minutes for a soft-boiled egg or 10 minutes for a hard-boiled egg by turning the dial. After the time has elapsed, in the meantime the "sand" has visually trickled from the top to the bottom, the beeper sounds and announces: Egg is ready!

The power supply of this intelligent hourglass is provided by a power bank or directly at a USB port, for example a mobile phone charger. This eliminates the costly use of an extra battery.

• Suitable for: Schools, training centres, workshops, etc.
• Age recommendation: from 10 years
• Difficulty level: medium

  [ MANUAL - 2,90 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

Good or bad mood? The battery-operated soldering kit "mood barometer Smiley" makes it visible to all. Alternatively, the smiley laughs or annoys, depending on how he is hired.
The kit with more than 30 parts is very well suited for the "first soldering". The smiley is operated on a 9 volt battery, which is not included in the delivery. The enclosed plywood front can be decorated as desired. Dimensions: 80 x 80 x 50 mm, over 30 components.

What else is needed during construction: soldering iron, solder, 9 V block battery, side cutter, wood glue

  [ MANUAL - 1,25 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

The "TYB" board kit is an excellent introduction to soldering, future electronics engineers and amateur technicians, and anybody who enjoys working with a soldering iron or a soldering station. Over 40 parts will be soldered onto the "TYP" board, including a preprogrammed microprocessor. Once the board is fully assembled, the "TrainYourBrain" program on the processor starts exciting games with various difficulties.

The 7 segment display shows numbers from 1 to 5, which the player must then enter correctly with the pushbuttons. If the entries were correct, you advance with the next round. Sounds simply, but just wait until the number sequence is longer or colours are added to the number and the output speed is faster: "TrainYourBrain". Improves memory and focus, and the best part is: it's fun!
The electronics kit is powered via power bank or directly via USB port. So you don't need an expensive battery.

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

 [ MANUAL - 2,70 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

A particularly durable and stable aid for soldering and assembly work. Thanks to this magnifier, you have a clear view of the workpiece and you can easily attach the clamps to the parts being processed. Integrated storage in one of the supporting feet provides safe storage for small parts. Thanks to its construction, this handy model can be adjusted in a clean and very precise manner.

This very high-quality work light is ideal for precise work at home, in the office, in the workshop and wherever detail is important.

Tip: We use this product to illuminate our own soldering and experimentation workstations. The light of the work lamp is very bright at the highest level and can optionally be changed between warm and cold white in several levels. The illumination is optimal thanks to the high number of LEDs.

TECHNICAL SPECIFICATIONS:

• Watt: 30
• Number of LEDs: 324
• Lumens: 2500
• Light spectrum: 3000 - 6000 K, 30 W, 324 LEDs