The PeakTech 1070 impresses with its excellent price / performance ratio as a TÜV / GS-approved multimeter for the hobby electronics engineer or training area. In addition to the extensive measurement functions for direct / alternating voltage, direct current and resistance, this model has a fast-responding continuity test with an acoustic signal and a diode test. In addition, this model has a temperature measurement function with the enclosed wire sensor, which offers a useful addition to the measurement functions, especially for the hobby area. The measuring range is selected manually, which means that this multimeter displays a measured value particularly quickly.

Specifcations

This micromotor with a diameter of 6 mm and a length of 10 mm was manufactured as a 5-pole version. This reduces the speed, but at the same time the torque is increased and the motor gains significantly in power. This small micromotor is therefore particularly suitable for self-build gearboxes, e.g. for the Car-System or for radio-controlled 1:87 models. Due to its very small dimensions, the micromotor also fits into tiny models.
The output shaft has a diameter of 0.8 mm and a length of approx. 3 mm and is therefore suitable for matching gears and worms.

 TECHNICAL DATA:

• Rated voltage (V) : 3
• Voltage range (V) : 0.1 - 5.0 V
• No-load speed (rpm) : 25000
• Dimensions diameter / length (mm) : 6 x 10
• Weight (g) : 1,66
• Axle diameter (mm) : 0,8
• Axle length (mm) : 3
• Cable length (mm) : 150

Bi-Color LED, 3 mm diameter with 24 cm cable, warm white/red.
For connection in digital locomotives, push-pull trains, railcars and much more.

Technical data:
Color: warm white / red
Voltage range: DC 5 – 20 volts
Housing color: clear
Connections: white cable = cathode (-) “white LED”, red cable = cathode (-) “red LED”, black cable = common anode (+)

This servo is characterized by its smallest dimensions (19.8 x 8.4 x 21.3 mm) and an extremely low weight (3.7 g). Nevertheless, it offers an actuating force of 0.8 kg / cm² at 6 V and, in contrast to many other micro servos, is protected by its classic housing. It is therefore ideal for small models, special functions and models that, due to their shape, only offer little space for installing a servo. In addition to the classic steering, there are no limits to your imagination; Raising and lowering movements, door openers, signal masts, couplings, etc., almost everything is now possible in a simple way. The servo has a JR connector.

• Size: 19.8 x 8.4 x 21.3mm
• Voltage: 3.5 - 6V
• Speed: 0.12 sec / 60 degrees
• Weight: 3.7 grams

Ideal for small vehicle models, ships and indoor pilots.

The RX32D-SUM is a 9-channel 2.4Ghz receiver in the spectrum-compatible DSM2 and DSMX protocol. In this special configuration, the 9 channels are available as a PPM sum signal on solder pad 3. This allows them to be evaluated via the RSL, for example.

TECHNICAL DATA:

• Dimension: 11 x 11.1 x 1.2 mm
• Weight: 0,28 g
• Voltage: 3-10 V
• Channels: 9
• Protocol: DSM2/DSMX Spectrum compatible

S12 worm, M0.2 module, 1.2 mm bore, for metal gears

Brass worm, module M0.2, inner bore 1.2 mm, length approx. 3.5 mm, diameter: 2.8 mm, suitable for 4 mm motor, with metal gear 1:125 (art. 63125)

[ Dimensions - 43 Ko ]

Battery holder for 2 mignon cells (AA), closed version with integrated switch.

- For flexible location of batteries 
- Enables easy and convenient battery replacement
- Snap-in battery cover
- Design: closed housing with on/off switch
- Connection type: 150 mm long stranded wire

The Jumper T-Pro has six proportional channels, two 3-position switches, two push-buttons and six radio buttons. Thanks to the OpenTx system, the system can be configured very freely in large parts and adapted to the respective requirements.
In DSM2 and DSMX protocol, the transmitter has up to 12 channels and is therefore also perfectly suited for function model building. The system also has FRsky (16 channels), FlySky and many other protocols.
The system also has wear-free Hall sensors on the joysticks, vibration alarm and voice output.

A small but fine multiprotocol transmitter with JP4in1 module.

2 LI-ION batteries type 18650 are required to operate the system. The micro SD card recommended for operation and a USB-C cable for charging and updates are already included.

The system can be configured via a scroll button and 3 menu navigation buttons. Somewhat more conveniently, all settings can also be made via the freely available Open-TX Companion software.  

TECHNICAL DATA:

• Width / height / depth: 160 x 128 x 68 mm
• Weight without battery: 288 g
• Voltage range: 6 - 8.4 V
• Power supply: 2x Li-ION 18650 (not included)
• Firmware: OpenTX
• Display: 1.3 inch 128x64 pixel
• Joystick: Gimbals with Hall sensors
• Micro SD slot: Micro SD (included)
• Interfaces: 3.5 mm PPM simulator jack
• USB-C socket for charging and updating

 [ BUILDING MANUAL- 1,61 Mo ] 

With this soldering kit you can build a great electronic cube. Thanks to the detailed colour instructions and the included bending aid for resistors and diodes, the "electronic cube" soldering kit is ideal for beginners, beginners and advanced students.
A standard 9 V battery (not included) serves as the power supply. When the start button is pressed, the soldered IC generates a random number between 1 and 6 and outputs this value on the 7 large red 5 mm LEDs. The "electronic dice" thus replaces conventional dice, is modern and does not fall off the table when playing. Especially wild or older dice players appreciate this.
Size: 40 x 60 mm

Difficulty level: easy / medium
Construction time (depending on experience): 45 - 60 minutes
Age recommendation: from 10 years (only under adult supervision!)

 [ MANUAL - 1,20 Mo ]

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

This new gear holder set offers optimal protection as well as the simplest mounting option for all metal gears of the G50-G1000 series. The exposed gears are protected by the gear holder and this prevents the penetration of dirt, which could damage the individual gears.

The set already includes 2 threaded screws M1.6 x 2 mm so that the gear unit can be screwed to the holder. The gearbox holder can be either screwed or glued.
The gearbox holder is suitable for all metal gearboxes G50 - G1000, 6 and 12 V, as well as for N20 and N30 gearboxes.

Weight: approx. 3 grams, dimensions: (L x W x H) 14 x 28 x 14 mm

Set consists of:
- 1 pc. Gearbox holder black, ABS,
- 2 pcs. M1.6 x 2 mm for screwing the gearbox to the bracket (Delivery without gearbox)