This gearbox is specially designed as a tilting drive for 2-axle and 3-axle tipper semi-trailers as well as tandem tippers. The gearbox provides sufficient power to tip a full trough with sand. In the vehicle frame only a few webs need to be removed so that the gear rests with the cutouts on the axles.

TECHNICAL SPECIFICATIONS:
Voltage range 0.15 - 5 V
Dimensions: 30.7 x 8 x 10.5 mm

The double-axle gearbox is intended for 1:87 scale tractors and trailer trains. The gears are made of brass, the axes of steel. The housing halves are connected by means of 2 x M1 screws. The waves are stored in copper sockets. The motor shaft is ball-bearing.

The reduction is 1:95.
The center distance is 15,5 mm.

The gearbox is ready assembled and tested.

The double-axle gearbox is intended for 1:87 scale tractors and trailer trains. The gears are made of brass, the axes of steel. The housing halves are connected by means of 2 x M1 screws. The waves are stored in copper sockets. The motor shaft is ball-bearing.

The reduction is 1:95.
The center distance is 16 mm.

The gearbox is ready assembled and tested.

This soldering kit should provide a simple introduction to the basic knowledge of soldering. It is very well suited for guided soldering classes in schools and workshops. In addition, Willi the Ghost can be used in holiday programs, in country school homes and other events around the topic of soldering. 

Dimensions: 105 x 82 x 28 mm (H x W x D).

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

The soldering kit "flashing heart", with flickering candle LEDs, is ideal for soldering experience when soldering on a board to collect. For this purpose, over 30 components are soldered step by step according to a detailed manual on the board. Once the kit has been set up, the heart can be operated in continuous or flashing mode.

The enclosed plywood front can be decorated as desired and mounted on request. Dimensions: 70 x 70 mm, over 30 components.The power supply of the electronics kit "flashing heart" is provided by a power bank or directly at a USB output.

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

In the soldering kit Christmas tree genuine Flacker LEDs are used. The kit can be set to permanent or flashing operations. A great electronics kit for the decoration area and all who want to learn the soldering. The enclosed plywood front can be decorated for Christmas and then mounted. Dimensions: 100 x 70 mm. The power supply of the electronic kit "Christmas tree" is made by a power bank or directly to a USB output.

What else is needed:
Soldering iron, solder, side cutter, tweezers, power bank or USB output

Age recommendation: 10 years and up, always while being supervised by a responsible adult.

ATTENTION! Not suitable for children under 3 years, risk of choking on small parts.

With this kit, the construction of a simple worm gear for e.g. the drive of a vehicle of the car system or a RC model in 1:87 scale a breeze.

The delivery includes:
Motor diameter 6 mm 5-pole, worm M 0.2, gear 26 teeth M 0.2, axis 1 mm 24 mm long, 2 bushing bearings, 2-part motor clip and a mounting aid.

Areas of application: Vehicle drives of 1:87 RC models and car system vehicles, radar, special functions

Voltage range: 0.5 - 4.8 volts

 [ MANUAL - 331 Ko ]

 [ TECHNICAL SPECIFICATIONS - 269 Ko ]

Transmission G100M / 4.5V with M2 threaded rod, ratio 1: 100

TECHNICAL SPECIFICATIONS:

• Voltage range: 0.4 - 4.5 V
• Dimensions: 8 x 10 x 55 mm
• Threaded rod: M2 x 30 mm
• Translation: 1: 100
• Imax (standstill): 700 mA@4.5V
• Speed: 15 rpm @ 0.4V - 250 rpm / 4.5V
• Connection: solder lugs
• gears: metal

 [ MANUAL - 190 Ko ]

 [ TECHNICAL DATA SHEET - 248 Ko ]

EAN : 4037373254835

Lithium polymer battery 35 mAh, with deep discharge protection. For smallest models or special features, this little thing offers. It fits easily in H0 cars and still allows acceptable travel times. But also bright buoys, illuminated trailers or e.g. Construction site barriers of larger scales can be equipped with it.

TECHNICAL SPECIFICATIONS:

• Rated capacity: 35 mAh
• Dimensions: 14 x 10 x 4 mm
• Voltage: 3.7V
• Weight: 1.05 grams
• Cable length: 40 mm